logo
salesjkt@flotech.co.id

iSOLV MLG28


Based on a single float and magnetic flaps or float indicator. The measuring tube that carries a float is installed like an external chamber to the side of a tank.

The magnet inside the float actuates the magnetic flaps or float indicator according to change in liquid level in the measuring tube.

The float or column of yellow colour flaps indicates the liquid level in the tank which corresponds to the liquid level in the measuring tube.

Application reference:

ENQUIRY
Request Price, Order and Brochure click here.
Features


• Different wetted part materials are available. For example stainless Steel, PTFE and PVC.
• Rugged construction for the roughest industrial applications. These indicators perform in high temperature,
 high pressure, and many other applications requiring robust and high-quality design.
• Little or no materials required and less risk of leakage than a sight glass
• Add-on switches for Alarms and level control
• Add-on 4-20mA transmitter suitable for temperature up to 200°C with special heat insulated cover on the measuring tube.
• Level gauge with 4-20mA transmitter suitable for temperature up to 200°C with special heat insulation cover on the measuring tube.
• Level measurement for low and medium height vessel or tank.
• Measurement unaffected by presence of mechanical agitator or color of the fluid.
• Can be used for interface level measurement. For example oil/water and foam/liquid.

Application


• Rugged construction for the roughest industrial applications. These indicators perform in high temperature,
 high pressure, and many other applications requiring robust and high-quality design.
• Level measurement for low and medium height vessel or tank.
• Measurement unaffected by presence of mechanical agitator or color of the fluid.
• Can be used for interface level measurement. For example oil/water and foam/liquid.

Related Industry

Chemical
Pulp and Paper
Water/Wasterwater
Pharmaceutical
Oil and Gas
Food and Beverages

Specifications


• Accuracy: ± 5 mm of actual level
• Maximum Fluid Viscosity: 5000 cP
• Maximum Allowable Operating Pressure: 40 bar - depend on material, flange pressure rating (higher pressure on request)
• Measuring Range:
 a. 0.3 to 6m (for SS and PTFE version)
 b. 0.3 to 3m (for PVC version)
• Maximum Fluid Temperature:
 a. Standard: -40°C to +200°C (SS Version)
   -20°C to + 200°C (PTFE Version)
 b. Option: -40°C to + 400°C (Consult Flotech)
• Minimum Fluid Density (Float): ≤0.55 kg/l (SS/PTFE) , ≤0.85 kg/l (PVC)
• Process Connection: DN15...50 PN 16/40; 1/2”...2” ANSI 150/300lbs, others on request
• Float Material: 316 SS, PVC, PTFE, Titanium
• Gasket Material: PTFE (standard), Steel*
• Flange Material: 316 SS, PVC
• Indicator Type: Bi-colour flap or float* indicator
• Bi-colour flap casing: House in a borosilicate glass welded-sealed under partial vacuum
• Mounting Position: Vertical - side/side, top/bottom and others on request
• Ingress Protection: (Indicator) IP 68 (Equivalent to NEMA 6)
• Optional Features :
 a. Limit switch (bi-stable switch)
 b. Remote signal transmitter (4-20mA)
 c. Isolation valves
 d. Vent / drain valves

FLOTECH CONTROLS INDONESIA
Jl. Boulevard Artha Gading - Artha Gading Niaga
Blok F/7, Kelapa Gading - Jakarta 14240 Indonesia
Telp: +62 21 45850778 / Fax: +62 21 45850779
Copyright © 2017 - PT Flotech Controls Indonesia || All Rights Reserved
Mobile Site