iSOLV AFC100 is a complete system that measures free chlorine in water.
The AFC100 have two type sensor:
1. Polarographic Sensor (AFC100-A)
2. Potentiostatic Cell (AFC100-B)
iSOLV ATS500 sensors based on nephelometry measure turbidity according to ISO 7027 / EN 27027. They feature an LED lamp and a light detector that is positioned in a 90 degree angle.The lamp emits a beam into the medium, where it generates a scattered light as soon as it hits a particle in a defined area. The detector converts the received light intensity into an electric signal.
iSOLV AC880 can be configured to measure conductivity and/or TDS or other indirect scales during the installation, it's also possible the visualization of resistivity.
It provides manual and automatic temperature compensation, if an RTD Pt100 or an RTD Pt1000 is connected.
When the RTD is connected, the instruments provides the temperature reading.
iSOLV APH480 is a pH meter scientific instrument that measures the hydrogen-ion activity in water-based solutions, indicating its acidity or alkalinity expressed as pH.
The controller can be configured to measure pH or ORP during the installation. It provides manual and automatic temperature compensation, if an RTD Pt100 or an RTD Pt1000 is connected. When the RTD is connected, the instruments provides the temperature reading.
iSOLV VORTEXFLO as a compact flowmeter in a flange version is suitable for universal use in measuring liquids, gases and vapours.
The temperature compensation for saturated steam is integrated as standard, thus enabling direct compensation of the density; the mass and energy can also be measured.
iSOLV electromagnetic flowmeter can be used for precise flow measurement of all electrically conductive liquids - sludges, slurries, sewage, milk, water. The only pre-requisite being that the minimum conductivity of the medium is greater than 5µS/cm. Temperature, viscosity, density has no influence on the measurement.